Previous Thread
From what I (think I) understand, an HP TouchSmart tx2 (1244ca) running Windows 7 RC and the latest N-Trig drivers should support multi-touch. Am I right?
In my case, it doesn't work.
I see many N-Trig entries in Device Manager, some under "Digitizers" having version 1.26.0.0, dated 2008-07-20, another under "Human Interface Devices" named "N-Trig HID Multi-Touch filter" having version 1.26.8.12 dated 2009-03-18.
I've made sure "Pen mode only" wasn't selected under the N-Trig Control Panel applet options. I have tried a reset of touch calibration.
What should be my next step?
Add Your Reply
Sponsored Links
Copyright © 2012
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My Open Router |
Pogoplugged |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
This community site, TouchSmartDevZone.com (including its terms of use, privacy policy and content), is offered by and managed by Capable Networks LLC, not by Hewlett-Packard Company (HP). HP is not responsible for the performance of this community site or for any content posted on the site nor is HP liable for any damages or losses caused or alleged to have been caused by the use this Capable Networks community site. The Community Site is intended for TouchSmart users in the United States and Canada.
I did a repair of the N-trig drivers and it now works! Woohoo! WM_TOUCH, here I come.