October 3, 2009 10:56 PM

ok nvm.....I click on the link on my email and it says removed....click on your link and it is fine. Sry.

Having Trouble with your TX2 Series Tablet and Linux? Join us at the Touchsmart Linux Group.
http://www.touchsmartdevzone.com/group/3/Touch-Smart-with-Linux/

October 4, 2009 8:47 PM updated: October 4, 2009 8:48 PM

So my final question is:

The vga webcam...... I happen to have a 1.3 mp webcam in my dv6200cto, I was wondering..... can I simpilly switch the webcam and have 1.3 mp on my tx2?

I would imagine that the webcam is on the usb bus for both computers. As long as the connector on both motherboards is the same I can't think of why it [edit]wouldn't work.

A better concern is if the dv6200 will physically fit in the same space on the tx2z, also the wire may be a different length. Cables on the tx2z feed though the central hinge while the dv6200 they go through the left or right hinges, the dv6200's cable for the camera may not be long enough to reach on the tx2.

Best way to gauge it would be to look for a service manual for both systems that covers replacing the camera. Past that you won't really know until you open them up and look. I suppose HP would prefer that I also add trying to do this is risky and might damage your system/void your warranty.