Hello everyone!

I would like to know if someone has observed this strange behavior described bellow.

I'm using Windows 7 RTM x64 on my TX2-1020us, but I noticed that Microsoft Virtual WiFi was installed 2 days ago. So, 2 wireless network cards (Broadcom and Microsoft Virtual miniport) are appearing now.

It happened after undervolting my TX2-1020us using the K10STAT software.

The default values for ZM-82 Processor were:
P0 = 1.125V (2200 MHz)
P1 = 0.95V (1100 MHz),
P2 = 0.80V (550 MHz),

Initially, I set these values:
P0 = 1.075V (2200 MHz)
P1 = 0.90V (1100 MHz)
P2 = 0.75V (550 MHz)

After that, I modified one more time the P0 and P1 states:
P0 = 1.05V (2200 MHz)
P1 = 0.80V (1100 MHz)
P2 = 0.75V (550 MHz)

I think the change in voltage might have allowed the installation of MS Virtual WiFi. Is it possible?

I’m afraid if this is a Broadcom wireless card issue (i.e. 1st indication of heating problems on TX1000 and TX2000 series).

After that, I did a clean install of Windows 7 and I have neither installed windows updates nor used K10STAT software. So far, the MS Virtual WiFi didn’t appear.

Anyone else has noticed if the Microsoft Virtual WiFi has been installed on your TX2?

Thanks for any information.