Previous Thread
Zor.. Thank you very much for sharing this information.
| TITLE: | N-Trig DuoSense Digitizer Software and Driver |
| VERSION: | 2.184 REV: A |
| DESCRIPTION: | This package provides the N-Trig DuoSense Digitizer Software and Driver for the supported notebook/laptop models and operating systems. The N-Trig DuoSense Digitizer Software provides multi-touch technology that supports both pen and touch digitizer screens. |
| PURPOSE: | Recommended |
| SoftPaq NUMBER: | sp46082 |
| SUPERSEDES: | None |
| EFFECTIVE DATE: | November 11, 2009 |
| CATEGORY: | Software - Solutions |
| SSM SUPPORTED: | YES |
| PRODUCT TYPE(S): | Notebooks |
| HARDWARE PRODUCT MODEL(S): | HP TouchSmart tx2 Notebook PC |
| OPERATING SYSTEM(S): | Microsoft Windows 7 Home Basic 32 Edition Microsoft Windows 7 Home Premium 32 Edition Microsoft Windows 7 Starter 32 Edition Microsoft Windows 7 Ultimate 32 Edition |
| LANGUAGE(S): | Global |
| ENHANCEMENTS: | - Provides support for the Microsoft Windows 7 Operating Systems (32-bit). |
| PREREQUISITES: | None |
ftp://ftp.hp.com/pub/softpaq/sp46001-46500/sp46082.exe
In my case, I had several problems after BIOS F.25 using N-Trig v.184 on Windows 7 64bit. Ghost clicks came back and touch was horrible when I used it on battery. I tried return to F.21, but it didn't work properly. So, I came back to Windows Vista 64bit. Until now, touch is OK. However, for those who are with Windows 7 32bit version, good luck! I hope this driver works nicely.
HP
- member since: 11/13/2009
- rank: 1187 of 12557
- 2 articles authored
- 1 forum threads started
- 111 comments
January 29, 2010 2:24 AM
They didn't release anything for x86 by now except for an .html and .cva. The .exe isn't up on the ftp server. So the link provided by zor is inactive for now.
January 29, 2010 6:41 AM
updated: January 29, 2010 6:56 AM
Travis Bickle said: They didn't release anything for x86 by now except for an .html and .cva. The .exe isn't up on the ftp server. So the link provided by zor is inactive for now.Hmm, when I found this file on ftp server, it was available. However, .exe was really removed. What is going on? Will HP release new drivers?
January 29, 2010 7:15 AM
If it really was then it was just for a few hours. I'll be patient one day more or less, who cares? Already waiting 3 months.
January 30, 2010 1:54 PM
updated: January 30, 2010 1:56 PM
sounds like this only supports 2 fingers...
and furthermore, it seems that N-trig is no longer provide Auto Mode...
February 3, 2010 12:53 AM
I had some issues with driver 2.184 and after talking with N-trig, i learned that a new driver for 4 Finger will be posted within the next 2 weeks. Driver number should be 2.239 and will support Win7 x32 and x64.
February 3, 2010 7:46 AM
Nice to hear that, but I think that 2 weeks for ntrig, means 4 months for the rest of the world
February 5, 2010 12:48 AM
I am using this right now, and so far, there's no ghost clicks and jumping cursors like I had with 2.59. I uninstalled Ntrig duo sense first from control panel before I installed 2.184.
Tx2-1011au
Windows 7 Home Premium 32-bit
AMD Turion X2 Ultra Dual-Core Mobile ZM-84
ATI Radeon HD 3200 Graphics
4GB RAM
250GB HDD
February 5, 2010 2:12 AM
zirdaj said: I am using this right now, and so far, there's no ghost clicks and jumping cursors like I had with 2.59. I uninstalled Ntrig duo sense first from control panel before I installed 2.184.
For how many days you're using version 2.184 now?
February 5, 2010 3:35 AM
Travis Bickle said:zirdaj said: I am using this right now, and so far, there's no ghost clicks and jumping cursors like I had with 2.59. I uninstalled Ntrig duo sense first from control panel before I installed 2.184.For how many days you're using version 2.184 now?Its been a day now. For my experience with 2.59, I immediately had the ghost clicks right after rebooting. For the longest time I was using a certain 2.153 I got from upgrading and not doing a clean install to windows 7. It didn't have any ghost clicks, but it got messed up yesterday when I had to reinstall Norton. I wasn't able to backup that 2.153 so I went ahead and tried 2.59 (being scared of 2.184). After immediately experiencing ghost *****, I uninstalled it and tried this new 2.184, and so far, no problems. I'll be glad to post updates in case it acts up. ^^
Tx2-1011au
Windows 7 Home Premium 32-bit
AMD Turion X2 Ultra Dual-Core Mobile ZM-84
ATI Radeon HD 3200 Graphics
4GB RAM
250GB HDD
February 5, 2010 5:16 AM
Well maybe then I'll give a try to version 2.184. I don't care whether I get two or four touchpoints. Besides playing around with MS Touchpack there is no need for four touchpoints right now and Touchpack becomes pretty boring with time. Thanks for your answer zirdaj.
February 5, 2010 5:01 PM
Theb ghost clicks may be a pen issue...I had the same problem...got a new pen and the 4 point N-trig driver software works perfectly.
February 6, 2010 12:48 AM
updated: February 6, 2010 1:03 AM
I'm glad to say that I haven't gotten any problems yet with 2.184, day 2. :)
Chasad, I am happy to hear that you are not having any issues with 2.59, but I am certain that my pen doesn't have problems, as I have been using it extensively since I got my notebook and I never had the ghost click problem until I installed 2.59. Must be my bad luck. :p
EDIT: and I spoke to soon, lol. Just realized that my touchscreen stopped working. No error on device manager. I didn't get any "usb not recognized" error as well. Computer says I got pen input and 2 touch points which is normal. Tried resetting/touch tuning but touch still not working. Even the stylus isn't working.
It was resolved after the reboot. I hope it is just a random bug and won't be as persistent as the other known issues with the other driver.
Tx2-1011au
Windows 7 Home Premium 32-bit
AMD Turion X2 Ultra Dual-Core Mobile ZM-84
ATI Radeon HD 3200 Graphics
4GB RAM
250GB HDD
February 6, 2010 11:18 PM
I just had the jumping ghost clicks now. :(
It wasn't like what I've experienced with 2.59 though. With 2.59, the mouse would jump and click to a random space every couple of minutes. With what just happened now with 2.184, the cursor started jumping and clicking continuously at a fast pace, I couldn't even control it quick enough to close my browser. I put my notebook to sleep by sliding the power button, and after I wake it up, things are back to normal.
Tx2-1011au
Windows 7 Home Premium 32-bit
AMD Turion X2 Ultra Dual-Core Mobile ZM-84
ATI Radeon HD 3200 Graphics
4GB RAM
250GB HDD
February 6, 2010 11:29 PM
yep, going to sleep mode, solves the "continuos click".
But, it get worse after time, and now, I have to go to sleep almost everytime I turn on the computer to make the touchscreen works right.
Add Your Reply
Sponsored Links
Copyright © 2012
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My Open Router |
Pogoplugged |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
This community site, TouchSmartDevZone.com (including its terms of use, privacy policy and content), is offered by and managed by Capable Networks LLC, not by Hewlett-Packard Company (HP). HP is not responsible for the performance of this community site or for any content posted on the site nor is HP liable for any damages or losses caused or alleged to have been caused by the use this Capable Networks community site. The Community Site is intended for TouchSmart users in the United States and Canada.
