HI,
I just wanted to share this link with everyone that wants to have Corel Paint it! on their touchsmartÑ
Just extract the file with winRar in a folder, find the \src folder and install the .exe
You will have it on your TS software
I hope u like!
Samuel
This is great its even in Danish....
I can install it without any problems but I dont get any "Paintit!" start icon in Touchsmart 4.0 ? Any tips...
I did the setup.exe under SCR.... anything else I need to do?
I also checked the Programfolder and there is a Paintit folder under the Touchsmart apps dir...so why can I see it in Touchsmart?
Thanks for the info about Paintit... I have been looking for it since I got my Touchsmart...
run
registersmartcenterapp.exe updateconfig TouchPaint\DefaultAppSettings\Bottom\PaintIt5AFE0625-69DB-4e16-A017-9DA723649A33.xml
Worked great on my IQ816 running TS 3.0.35.0 and windows 7 64bit. Thanks a lot!!!
Unfortunately don't work for me! The strange is that is available in:C:\Program Files (x86)\Hewlett-Packard\TouchSmart, but is not available in Touch Smart by self.I apply:run
registersmartcenterapp.exe updateconfig TouchPaint\DefaultAppSettings\Bottom\PaintIt5AFE0625-69DB-4e16-A017-9DA723649A33.xml
thank you Digger!
But again - don't see anything in TS interface! Any ideas or advices?
HP TOUCH SMART TM2 2150st.win7-64b.
February 9, 2011 9:29 PM
You have to register it manually if the "registersmartcenterapp.exe" doesn't work. It's actually very simple and I almost always go the manual rout.
You do this by finding the "xml" for the app. Since you manually installed the app, the xml "bottom" will be in the folder you extracted, (paint it\TouchPaint\DefaultAppSettings\Bottom). Coppy it into the folder, C:\ProgramData\Hewlett-Packard\TouchSmart\SmartCenter 2.0\DefaultAppSettings. If that doesn't work than copy the same xml to the folder, C:\ProgramData\Hewlett-Packard\TouchSmart\SmartCenter 2.0\UpdateAppSettings.
Than re-open touchsmart and you should be good to go.
badmoon8081 said: You have to register it manually if the "registersmartcenterapp.exe" doesn't work. It's actually very simple and I almost always go the manual rout. You do this by finding the "xml" for the app. Since you manually installed the app, the xml "bottom" will be in the folder you extracted, (paint it\TouchPaint\DefaultAppSettings\Bottom). Coppy it into the folder, C:\ProgramData\Hewlett-Packard\TouchSmart\SmartCenter 2.0\DefaultAppSettings. If that doesn't work than copy the same xml to the folder, C:\ProgramData\Hewlett-Packard\TouchSmart\SmartCenter 2.0\UpdateAppSettings. Than re-open touchsmart and you should be good to go.
That is it :) +5
THANK YOU SO MUCH!!!
The problem is resolved :) My son is soooo happy...also i ;)
Copyright © 2012
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My Open Router |
Pogoplugged |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
This community site, TouchSmartDevZone.com (including its terms of use, privacy policy and content), is offered by and managed by Capable Networks LLC, not by Hewlett-Packard Company (HP). HP is not responsible for the performance of this community site or for any content posted on the site nor is HP liable for any damages or losses caused or alleged to have been caused by the use this Capable Networks community site. The Community Site is intended for TouchSmart users in the United States and Canada.
Did you forget your password?
You can also log in using OpenID.
Previous Thread
